Tone Generator & Probe Kit for Network and Coaxial Cables

Regular price $114.45

This Tone Generator is a very practical tool, which provides a single or dual tone signal, two test leads and a 4-conductor modular cable. It generates a signal from one end and traces the cables from the other by probe, even when cables are in a bundle or hidden in a mess of punch down blocks or wall plates. It is easy to be used to verify cables continuity, pair condition, line polarity and voltage in network cabling systems (Category 5 and Coax) and modular telephone lines.

Tone Generator Features
  • Provides a tone switch for choosing either a single solid tone or dual alternating tone
  • Provides a toggle switch to control the 3 modes of operation
  • A three colors LED indicator display for line polarity, continuity and voltage testing
  • Provides black and red testing leads and a standard 4 pin modular cable for individual wire test or modular jack test Handy size and ease of use
Tone Generator Specification
  • 1 ft each of red and black test lead
  • 1 ft of 4 pin Modular cord and plug
  • One 3-position toggle switch for operation modes control
  • One 3-colors LED display for line polarity, continuity and voltage test
  • One 2-position slide switch for buzzer volume level selection
  • Power: 9 VDC Battery
  • Size: 115x63x26mm(4.53" x2.49" x1.03" )
  • Weight. 0.42 LB.
Probe Features
  • Can trace and identify wires or cables in a bundle or a group without damaging cables insulation
  • Can work with any existed tone generator in the market
  • Two levels of buzzer volume can be selected for increasing sensitivity and meeting with any work environment
  • Power switch prevents battery drain
Probe Specification
  • One push button test switch
  • One 2-position volume level switch
  • Power. 9VDC Battery
  • Size: 1l5 x 63 x 26mm(4,53" x 2.49" x 1.03" )
  • Weight: 0.36 LB
  • Warranty: Lifetime
  • Weight: 1.00 lbs